225LSingle door rapid-rate temp change testing chamber with LED lighting device
Control method and characteristics
High precision microcomputer temperature and humidity systems by PID controlling SSPR reduce the
system’s heating and humidification amount, to achieve low power consumption, energy saving, carbon
reduction effect. Intelligent electronic control of cooling, heating, humidity control, so it could be used long-
term stability.
Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research i
nstitution, inspection and quarantine bureau, university etc.
Prouduct Specifications
| Ⅳ. Main Technical Parameters(Water Cooled and Ambient +25℃, Empty loading) |
| Temperature Range | -40℃ ～ +100℃ |
| Temp Deviation | ≦±2.0℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | ≦2.0℃ |
| Rate Of temperature change | Test the following ramp rate at the air outlet, The rate of temperature change is based on the IEC-60068-3-5 standard. Heating rate: From-40℃ to +100℃ Nonlinear 5℃/min load 5kg Cooling rate:From +100℃ to -40℃ Nonlinear 5℃/min load 5kg |
| Ⅴ. Chamber Structure |
| Overall structure and chamber was composed of three parts as below. Insulation box, separate refrigeration units, and electrical control cabinet. |
| Chamber | Workspace volume: W 700 × H 700 × D 480 mm Exterior size: approximately W 1000 × H 1735 × D 2030 mm |
| Insulation | wall material: high-quality carbon steel with static color spray ※ inner wall material: SUS304 # matte stainless steel plate Insulation materials: rigid polyurethane foam insulation layer + glass fiber. |
| Door | Single door. Heating wire was installed at the door frames to prevent condensation at low temperatures. |
| Observation Window | Observation Window on the door, with multi-layers of electric painted heat hollow glasses to avoid condensation. |
| Lighting device | 1 LED lighting device located on observation window. |
| Heating | High-quality nickel-chromium alloy wire heater, non-contact control mode (SSR). |
| Water outlet hole | Equipped with studio condensate and unit condensate drain holes. |
| Thread port | φ50mm Thread port on left and right side with rubber lid and plastic cover. |
| Sample holder | Two layers of stainless steel sample holder, Adjustable spacing ,load capacity 30kg |
| Mobile casters | Include mobile casters (with goblet) |
| Electric control box | Total power circuit breaker, over-temperature protection. |
| Ⅵ.Refrigeration system |
| Compressor | German Bock semi-tight compressor or German semi-compact compressor. |
| Refrigerant | Non-fluorine environmental refrigerant, high temperature level refrigerant: R448A, R23 |
| Condenser | Shell-and-tube type condenser (water-cooled). |
| Evaporator | Fin-type multi-stage automatic load capacity adjustment, Long-term use of low temperature and high humidity conditions without frost. |
| Other Accessories | World top brand accessories, such as high accurate extension valve, driers, etc |
| Refrigerant flow control | Multi-stage adjustable energy consumption output control of the refrigeration system. |
| Refrigeration Technology | Nitrogen welding, two-stage rotary vane vacuum pump, ensure that the internal cooling system clean and reliable. water tray located at the bottom of the compressor to ensure condensate water drain through pipe freely at the rear of the chamber. |
Features
● GB-2423.1-2008(IEC68-2-1) test A: low-temperature test
● GB-2423.2-2008(IEC68-2-2) test B: high-temperature test
● GJB360.8-2009(MIL-STD.202F) Life of high temperature test
● GJBl50.3-2009(MIL-STD-810D) high-temperature test
● GJBl50.4-2009(MIL-STD-810D) low-temperature test
● GB2423.3-2008(IEC68-2-3) test Ca: constant damp heat test
● GB2423.4-2008(IEC68-2—30) test Db: Alternating hot and humid test method.
● GJBl50.9-2009(MIL-STD-810D) Damp heat test method.
Prouduct Display
Packing and Shipment:
(1).Strong standard wood case, inner plastic films wrapped for temperature and humidity test chamber
(2).Usually we delivery the equipment by air,by sea or by express. it depends on customer.
Pre-sales service
1) More than 20 years manufacturer experience and 8 years export experience.
2) Acceptable customization for all kinds of special specification products.
3) We value very inquiry sent to us, ensure quick and competitive offer.
4) We put your order into our tight production schedule,ensure your punctual delivery time.
5) We are a sales team, with more than 4 years experience, more professional and reliable.
6) Welcome to view our factory at any moment .
After-sales service
1) We deal with your complains within 24 hours.
2) Training how to install the machine, training how to use the machine.
3) Engineers available to service machinery overseas.
4) All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be
dedicated to provide high quality service and products for you.
Product Tags:
|
|
Single Door Rapid Rate Temp Change Environmental Chamber With LED Lighting Device Images
|
